ZDCS2 Motor unit

Motor unit Z series with DCS controller (ZDCS2) shall be used on medium-sized wiper systems (arm length up to 950 mm) on boats for civil and military applications and on pleasure boats, even for a particularly heavy duty. It is equipped with an electronic speed regulator able to communicate with other devices via the CAN bus. The ZDCS2 wiper motor unit can have 24Vdc or 110/220Vac power supply voltage. The ZDCS2 wiper motor unit has a starting torque of 45Nm. This motor is designed to ensure:

Movement synchronization of different wiper arms belonging to a group, using the CAN bus communication;
Two wiping speeds and five interval delays. The operating conditions are stabilized by the speed regulator in a wide range of voltages;
ZDCS2 window wiper motor unit is characterized by a compact design, easy installation and maintenance and high strength for heavy duty service. It is equipped with a specially designed electric box: it is possible to remove a motor without interrupting the CAN bus communication;
Motor unit overheating electronic protection;
Park position side fast setting.
Superior components are used to ensure long lasting systems;
Adjustable wiping angle (from 30° to 110° with 5° step) and park position side fast setting.
It complies with the IEC 60945 compliance.

Product features

Standard version technical features
Model number M/N	ZDCS2
Available rated voltage	V = 24 Vdc V = 110 ÷ 220 Vac multi-voltage
Starting torque	45 Nm
Nominal power	55 W
Starting power	220 W
Low speed	V1 = 30 stroke/min
High speed	V2 = 45 stroke/min
Bushing for wall thickness D	D = 10 ; 20 ; 30 ; 40 ; 50 ; 60 ; 70 ; 80 ; 100 mm Within 250 mm on request
Wiping angles α	α = 30°÷110° with 5° step
Self parking	Fc = DX right side, internal view and window upper part motor mounted Fc = SX left side, internal view and window upper part motor mounted
Weight	4,6 Kg
Finishing	Grey painted

Compatible Product

Compatible product	Typology	Model number	Link
Wiper arms	Pantograph (up to 950 mm) Pendulum (up to 950 mm)	Z20P Z20F	View View
Control system	Advanced Distributed Control System	DCS	View

Product Identification

Each motor unit ZDCS2 series is uniquely identified by its serial number reported on a label placed on the back side of the wiper motor.

Part number	Parameter name	Parameter value
M/N.V.D.α	Model number M/N	M/N = ZDCS2
	Voltage V	V = 024 for 24 Vdc V = 110 for 110 Vac, 50/60 Hz V = 220 for 220 Vac, 50/60 Hz
	Wall thickness D	D = 10 ; 20 ; 30 ; 40 ; 50 ; 60 ; 70 ; 80 ; 100 mm
	Wiping angles α	α = 030÷110 step 5°

Example: “ZDCS2.110.015.090” indicates ZDCS2 model wiper motor, 110 Vac voltage, shaft suitable for wall thickness within 15 mm and 90° wiping angle.

If you cannot find the right product version or for any questions, do not hesitate to contact us. Please always communicate the motor serial number for spare parts.

ZDCS2 Motor unit

MAIN DESCRIPTION

If you cannot find the right product version or for any questions, do not hesitate to contact us. Please always communicate the motor serial number for spare parts.