SDCS2 window wiper

MAIN DESCRIPTION

SDCS2 window wiper shall be used on large sized windows (arm length up to 1200 mm) on boats for civil and military applications and on pleasure boats, even for a particularly heavy duty. This system, modular and flexible, allows the realization and customization of even large bridge installations. DCS technology is based on the connection of the motors by means of a CAN Bus line, which allows to obtain a perfect synchronism of the wipers. The DCS system allows to manage the wipers individually or divided into groups by means of a customizable control panel.

SDCS2 wiper system is constructed out of non-corrosive and top-quality materials and extensive customization of finishes is available. It complies with the ISO 17899 compliance.

Motor Features

Model Number	SDCS2 Used on large sized wiper systems, Distributed Control System
Voltage V	V = 24 Vdc; 110/220 Vac
Bushing for wall thickness D	D = 10÷100 mm step 10 mm Within 250mm on request
Wiping Angle α	α = 30°÷110° step 5°
Blade self parking position Fc	Adjustable, available on right or left side of the window.
Finishing	Grey painted (standard version) Other finishes on request

Arms Features

Model Number

SP91P	Pantograph limited lift stainless steel arm,
SP91PL	Pantograph totally lift stainless steel arm,
SP91PD	Pantograph limited lift stainless steel arm, double version
SP91PHE	Pantograph limited lift stainless steel arm, heated version
SP91F	Pendulum limited lift stainless steel arm
SP91FL	Pendulum totally lift stainless steel arm

Wiper Arm Length L

L = 500 ÷ 1200 mm, with 50 mm steps for T09P (adjustable), SP91P, SP91PL, SP91PHE, SP91F, SP91FL

L = 600 ÷ 900 mm, with 50 mm steps for SP91PD

Blade fixing device width A

A = 16, 21 mm “U” shaped

Spray nozzles

Fan shape spray nozzles are available as optional for all models.

Bending

Wiper arm may be cranked for inward glass window over 75 mm.

All solution customed.

Finishing

Hand polished stainless steel (as standard)

Other finishes on request

Blades Features

Model Number

BLF	Wiper blades for flat windows, for heavy duty applications
X	Wiper blades for curved windows, for heavy duty applications

Blade Length S

S = 500 ÷ 800 mm, with 50 mm steps; 900 ÷ 1300 mm, with 100 mm steps

Control Panel Features

Operation Modes	Operation with panel: CAN bus commands is generated from a control panel, with a standard keypad proposed by us Operation with gateway: CAN bus commands is generated from a gateway connected with switches installed by the customer on the consolle Direct operation: CAN bus commands is generated directly from the integrated bridge system
Number of Wipers	Advanced control allows to operate up to 12 groups from 1 up to 8 wipers. It allows a perfect synchronization of the wipers in all operating conditions, both in continuous and intermittent operation mode. Synchronization occurs even if the wipers are different in dimensions and wiping angles.
Number of Auxiliaries	The DCS system provides the possibility to drive auxiliary devices that normally equips ship bridge, like elvalves of window rinse system, glass heater and wiper heater contactors and other devices. Each motor/control unit can manage 1 auxiliary. For centralized management of auxiliaries, we offer an auxiliary devices control unit, DCS.AUX4, a relay unit controlled by CANbus messages, which provides 4 power outputs to drive such auxiliaries.

Operation Modes

Operation with panel: CAN bus commands is generated from a control panel, with a standard keypad proposed by us

Operation with gateway: CAN bus commands is generated from a gateway connected with switches installed by the customer on the consolle

Direct operation: CAN bus commands is generated directly from the integrated bridge system

Number of Wipers

Advanced control allows to operate up to 12 groups from 1 up to 8 wipers.

It allows a perfect synchronization of the wipers in all operating conditions, both in continuous and intermittent operation mode. Synchronization occurs even if the wipers are different in dimensions and wiping angles.

Number of Auxiliaries

The DCS system provides the possibility to drive auxiliary devices that normally equips ship bridge, like elvalves of window rinse system, glass heater and wiper heater contactors and other devices. Each motor/control unit can manage 1 auxiliary. For centralized management of auxiliaries, we offer an auxiliary devices control unit, DCS.AUX4, a relay unit controlled by CANbus messages, which provides 4 power outputs to drive such auxiliaries.

WIPER MOTOR

Available rated voltage: 24Vdc, 110Vac, 220Vac;
Superior components are used to ensure long lasting systems;
Adjustable wiping angle and self-parking position side.

WIPER ARMS AND BLADES

Partial liftable pantograph SP91P and pendulum SP91F arms;
Wiper arms shapes and lengths are designed to suit all applications;
Wiper arms springs pressure is carefully selected to ensure smooth operation;
All arms constructed out of non-corrosive materials such as stainless steel AISI 316;
Available versions with spray nozzles (SP91P.ZZ type), double arm version (SP91PD type) and heated arm version (SP91PHE type);
Flat and articulated blades. Blade length is selected to suit all applications.

CONTROLLERS

DCS panel allows to operate up to 5 groups from 1 up to 8 wipers;
It is available in two sizes and different versions, depending on number and layout of the wipers;
Operating modes are available: intermitting mode, continuous mode;
The panel is backlighted, with dimmer;
Possibility to manage auxiliary devices (electrovalves for water/air, remote switches for window and arm heaters);
Possibility of carrying out a predetermined washing cycle by means of the electrovalves of the window washer equipment.

WASHING EQUIPMENTS AND ACCESSORIES

Electrovalves for water or purge air supply;
Wash hose kits with various adaptors for securing hoses;
Wall or wiper arm installed spray nozzles;
Fully integrated wash systems including controllers;
Windows custom made antiglear screens.

If you cannot find the right product version or for any questions, do not hesitate to contact us. Please always communicate the motor serial number for spare parts.