SDCS2 window wiper

SDCS2 window wiper
SDCS2 System SY

MAIN DESCRIPTION

SDCS2 window wiper shall be used on large sized windows (arm length up to 1200 mm) on pleasure boats and super yacht, even for a particulary heavy duty. DCS technology is based on the connection of the motors by means of a CAN Bus line, which allows to obtain a perfect synchronism of the wipers. The DCS system allows to manage the wipers individually or divided into groups by means of a customizable control panel.

SDCS2 wiper system is constructed out of non-corrosive and top quality materials and extensive customization of finishes is available. It complies with the ISO 17899 compliance.

Motor Features
Model NumberSDCS Used on large sized wiper systems, Distributed Control System
Voltage VV = 24 Vdc; 110/220 Vac
Bushing for wall thickness D D = 10÷100 mm step 10 mm
Wiping Angle αα = 30°÷110° step 5°
Blade self parking position FcAdjustable, available on right or left side of the window.
FinishingGrey painted (standard version)
Other finishes on request
Arm Features
Model Number
SP91PL Pantograph totally lift stainless steel arm,
SP91FL Pendulum totally lift stainless steel arm
Spray nozzlesFan shape spray nozzles are available as optional for all models.
Wiper Arm Length LL = 500 ÷ 1200 mm, with 50 mm steps
Blade fixing device width AA = 16, 21 mm “U” shaped
BendingWiper arm may be cranked for inward glass window over 75 mm.
All solution customed.
FinishingHand polished stainless steel (as standard)
Carbon fiber arms
Other finishes on request
Blades Features
Model Number
BLFWiper blades for flat windows, for heavy duty applications
XWiper blades for curved windows, for heavy duty applications
Blade Length SS = 500 ÷ 800 mm, with 50 mm steps; 900 ÷ 1300 mm, with 100 mm steps
Control Panel Features
Operation ModesOperation with panel: CAN bus commands is generated from a control panel, with a standard keypad proposed by us

Operation with gateway: CAN bus commands is generated from a gateway connected with switches installed by the customer on the consolle

Direct operation: CAN bus commands is generated directly from the integrated bridge system
Number of WipersAdvanced control allows to operate up to 12 groups from 1 up to 8 wipers.

It allows a perfect synchronization of the wipers in all operating conditions, both in continuous and intermittent operation mode. Synchronization occurs even if the wipers are different in dimensions and wiping angles.
Number of AuxiliariesThe DCS system provides the possibility to drive auxiliary devices that normally equips ship bridge, like elvalves of window rinse system, glass heater and wiper heater contactors and other devices. Each motor/control unit can manage 1 auxiliary. For centralized management of auxiliaries, we offer an auxiliary devices control unit, DCS.AUX4, a relay unit controlled by CANbus messages, which provides 4 power outputs to drive such auxiliaries.

If you cannot find the right product version or for any questions, do not hesitate to contact us. Please always communicate the motor serial number for spare parts.